A little knowledge is for the beginner in an IT or people who want to learn computers, about how to set a jumper on the disk. Set the jumpers on the hard drive is useful if you have two hard drives in a computer or have an ATA IDE cable in a computer which arranged for the computer to read the hard drive first, because the hard drive is a medium where we keep an Operating System if you have two hard drives and set jumpers on the second hard drive.
Two hard disk to be configured jumpernya, for the first disk is a disk in which an Operating System is going to be a master and for a second hard drive will be used as Slave.
Kamis, 21 April 2011
Mengkonfigurasi Jumper pada Harddisk
15.56
Sebastian
1 comment
See the picture above is a picture Configuration Jumper:
1 komentar:
informasi bermanfaar gan,kembangkan lebih bagus ya ganhttps://goo.gl/mDmFZx
Posting Komentar